Disc Emery – Fine

Product Code: 88198

Description

Disc Emery – Fine
The fine emery can be distinguished from the coarse wax by the wax colour which in the case of the FINE EMERY is a light shade of black. (COARSE EMERY is a shade of pink/violet.)
NEW DISC PREPERATION

Before sharpening commences please read the instruction for the correct preparation of the disc.

In the case of a brand new or re-milled disc it is important to apply a small amount of light engine motor oil (such as SA30 Oil) to the surface of the disc before the use of any emery wax as it helps the applied emery to adhere to the disc surface.

At the start of sharpening Hauptner recomend you apply a combination of both fine and coarse emery wax on to the wheel to achieve a balanced mixture.

The wax should be applied in such a way as to cover the whole surface of the wheel. Experience will dictate judgement!
Below is a guide as recommended by the disc manufacturer.

Whilst many machine operators may have their own preferences drawn from their practical experience of individual blades this guide is intended to give initial guidance.
GUIDE TO THE USE OF EMERY WAX

What emery sticks do I use on the disc for dog blades?:

The manufacturer suggests a fine emery wax.
What emery sticks do I use on the disc for horse blades?

If the horse blades are in good conditions you can use fine emery wax. However if they are slightly rusty or in poor conditions and you have to grind away a bit more material then the coarse emery is recommended.
Which emery stick do I use on the disc for sheep cutters and comb blades?

Please use fine emery wax.
When do I use both coarse and fine emery sticks?

When the disc is new you start with a small amount of oil on it and then give first some fine emery wax onto the surface, followed with the coarse one
Can I sharpen “CERAMIC” cutter blades?

NO. This is not possible!
PLEASE NOTE

Packaging may vary in materials and colour according to manufacturer’s shipments